The 3 most commonly used method for the LED video wall installation are: Floor standing, Hanging Installation, and Wall Mounted.
A big portion of our client will choose a suitable installation method for their own LED Wall according to site status and space requirements. To help you understand the possibilities of how to install LED Wall, We’ve put together three of the most common LED Wall mounting techniques.
1. Floor Standing LED Video Wall installation [Ground or Roof]
This method is the most common option for DOOH screens, requiring only a rear support system. In some cases, LED panel manufacturers have specially designed rear brackets to accommodate panels in this type of mounting. In many cases, you can use a standard truss with a base plate as a back support system. We also strongly recommend that you use a trained and insured installation company to assist with installation.
2. Hanging LED Video Wall
This method requires extensive rigging techniques and safety knowledge. The ceiling needs to be strong enough to support the total weight of the screen and keep the walls properly installed. If no existing structural onsite, additional engineering costs are required to install the required substructure.
3. Wall-mounted / 4.Wall-Embedded
With substructure the LED video wall can be installed on a wall, for small screen for example less than 4sqm the substure can be very simple, sometimes few 2mm steel plates will be ok. For bigger screens it is suggested to make a substructure with 40mm square tubes. In both ways the screen will be wall mounted, user can decorate the wall to make the screen surface same level with the decoration material.
5. Pillar Support
This is mainly for the outdoor advertising products, the screen can be installaed on an unipole or on dual poles, usually when there’s no wall onsite and the screen needs to be installed few meters from the ground, to save cost and make it easier, use the pillar to support the screen.